Da det er svært at skaffe 7,5 mm revolver ammo.
Kan man så skyde .32 S&W Long wadcutter i disse to?
Kan man skyde .32 S&W Long wadcutter i M1887 7,5 mm
-
Meulengracht
- Silver Member
- Indlæg: 240
- Tilmeldt: 10. sep 2011, 00:33
- Interesser: Sportsskydning, Jagt
- Geografisk sted: Sydsjælland
- Has thanked: 19 times
- Been thanked: 41 times
Kan man skyde .32 S&W Long wadcutter i M1887 7,5 mm
- Vedhæftede filer
-
- IMG_20210119_171952.jpg (34.77 KiB) Vist 1335 gange
Hilsen Meulengracht
Livet er kedeligt uden krudtrøg :-)
Livet er kedeligt uden krudtrøg :-)
-
Greyberd63
- Platin Member
- Indlæg: 2120
- Tilmeldt: 17. aug 2017, 19:14
- Interesser: Westernskydning og genladning
- Geografisk sted: hovedstadsområdet
- Has thanked: 475 times
- Been thanked: 312 times
Re: Kan man skyde .32 S&W Long wadcutter i M1887 7,5 mm
Kender ikke 1887, men Bloke on The range, gør det i en 7.5 mm revolver
youtu.be/4v0NQKoQuHA
mvh
Grey
youtu.be/4v0NQKoQuHA
mvh
Grey
-
T-REX
- This member is
- Indlæg: 7719
- Tilmeldt: 5. jan 2007, 18:58
- Interesser: Våben, Pistolskydning, Jagt
- Geografisk sted: Nuuk, Grønland
- Geografisk sted: Nuuk, Grønland
- Has thanked: 594 times
- Been thanked: 1245 times
Re: Kan man skyde .32 S&W Long wadcutter i M1887 7,5 mm
Hvis du læser Wiki om Nagant 1885 skriver de:
https://en.wikipedia.org/wiki/Nagant_M1895 skrev:Aftermarket cylinders for .32 can be installed, allowing the Nagant to safely fire .32 H&R or .32 ACP. Shooting any ammunition other than the 7.62x38mmR cartridge with the original cylinder can result in bodily injury from bullet shrapnel or escaping gas, and the excessive pressures produced by some .32 ammunition could also result in catastrophic failure of the cylinder or frame.
Skyttehilsen fra Nuuk, Grønland
T-Rex
But ain't many troubles that a man cain't fix
With seven hundred dollars and a thirty ought six."
http://dvc.org.uk/jeff/lindy2.html
T-Rex
But ain't many troubles that a man cain't fix
With seven hundred dollars and a thirty ought six."
http://dvc.org.uk/jeff/lindy2.html
-
Meulengracht
- Silver Member
- Indlæg: 240
- Tilmeldt: 10. sep 2011, 00:33
- Interesser: Sportsskydning, Jagt
- Geografisk sted: Sydsjælland
- Has thanked: 19 times
- Been thanked: 41 times
Re: Kan man skyde .32 S&W Long wadcutter i M1887 7,5 mm
Det er svenske Husqvarna 7,5 mm arme revolvere, men de er lavet som nagant bare uden den bevægelige tromle.
Den i Greyberds video er den schweiziske udgave.
Den i Greyberds video er den schweiziske udgave.
Hilsen Meulengracht
Livet er kedeligt uden krudtrøg :-)
Livet er kedeligt uden krudtrøg :-)
-
Greyberd63
- Platin Member
- Indlæg: 2120
- Tilmeldt: 17. aug 2017, 19:14
- Interesser: Westernskydning og genladning
- Geografisk sted: hovedstadsområdet
- Has thanked: 475 times
- Been thanked: 312 times
Re: Kan man skyde .32 S&W Long wadcutter i M1887 7,5 mm
http://www.gotavapen.se/gota/artiklar/s ... /rev87.htmThe commission 1884 tried several revolvers, including the Swiss 7.5 mm revolver m/82 and the Norwegian 9 mm Nagant revolver m/83. The Commission concluded that the best would be a combination of the Norwegian weapon's simple design and the high caliber of the Swiss caliber, impact and precision. Company Em & L Nagant was therefore commissioned to construct such a revolver.
Mvh
Grey
